All K28 tables feature certified tolerances and superior machining accuracy through several flatness and finishing stages. Each hole undergoes a meticulous four-step process with fine boring for smoother, more accurate cavities. Rounded holes, table corners and a 100mm x 50mm side grid come standard.
SIZE: 1500mm x 1000mm
MATERIAL: S355 Steel – Slightly better suited for TIG.
TREATMENT: Nitriding – Rust + Spatter + Hardened.
TOP GRID: 50mm x 50mm – 9 Holes Per 100mm².
SCALE (mm): CNC Machine Engraved – All 4 corners.
$5,400 Ex. GST
Heavy-duty table built for serious fabrication. Stays flat, cools fast, takes a beating. All K28 tables feature rounded holes and corners as standard. The side hole grid is 100mm x 50mm.
SIZE: 1500mm x 1000mm
MATERIAL: S355 Steel – Slightly better suited for TIG.
TREATMENT: Nitriding – Rust + Spatter + Hardened.
TOP GRID: 50mm x 50mm – 9 Holes Per 100mm².
SCALE (mm): CNC Machine Engraved – All 4 corners.
MATERIAL: T300 – Cast Iron.
PROPERTIES: High quality sand resin cast, more superior than vacuum cast. Naturally spatter resistant, rougher and a slightly tougher surface. Greater heat dispersion and engraving lines are rougher (see photo below.
HARDNESS: Nitriding ~450HV.
DENSITY: 7.25 g/cm³.
TENSILE STRENGTH: 345 MPa.
MATERIAL: S355 – STEEL.
PROPERTIES: Smooth surface, increased hardness (especially with nitriding treatment), cleaner ruler and grid etchings.
HARDNESS: Nitriding ~550HV.
DENSITY: 7.80 g/cm³.
TENSILE STRENGTH: 355 MPa.
BENEFITS: Huge hardness increase, spatter resistant, heat dispersion, rust resistant.
HARDNESS: Cast Iron ~450HV | Steel ~550HV.
STANDARD: Hole spacing of 100mm.
DIAGONAL: Has an extra hole in the centre compared to the Standard.
50mm: Has a whopping 9 holes per 100mm² – allowing for even more clamping and fixing possibilities!
FLATNESS: ±0.1mm over 1 m².
HOLE DISTANCE: ±0.05mm.
HOLE DIAMETER: +0.05mm.
| Weight | 505 kg |
|---|---|
| Dimensions | 1550 × 1050 × 400 mm |
© 2025 KO Welding Pty Ltd. All rights reserved. Site built by Bulldog Digital